Words of Wisdom:

"Always expect the unexpected" - Angelicagates

Benifits and Application of Drilling Mud Decanter Centrifuge

  • Date Submitted: 10/14/2014 01:39 AM
  • Flesch-Kincaid Score: 35.5 
  • Words: 321
  • Essay Grade: no grades
  • Report this Essay
Decanter centrifuge http://www.kosungroup.com/products/solids-control-equipment/decanter-centrifuge.html design consists of a solid container, called a bowl, which rotates at high speed. Inside the bowl tube, a screen conveyor rotates in the same direction, but at a slightly different speed. A differential gear is typically used to adjust speed.

Decanter centrifuge is also a important equipment in solids control system. It is widely used in drilling waste. It is used in separating suspension of solid phase with particle diameter≥2μm for drilling mud and fluids handling.

The following is the benifits of decanter centrifuge:

1. Horizontal spiral unloading settlement centrifuge vibration is low noise. By improving the centrifuge rotational part machining accuracy and the dynamic balance accuracy, the centrifuge vibration and noise can drop to a low level.
2. Simplified solids control system, low energy consumption, lighter working load, and the purification efficiency increases by 30% than original.
3. It can operate at full speed to finish feeding, centrifugal sedimentation discharge and other procedures, high degree of automation.
4. The machine has large production capability, compact structure, small occupation, and can automatically run. It is convenient to maintain and can be closed operation.
5. It uses the frequency conversion governor, compared with similar products with low energy consumption, working speed is adjustable, etc.
6. It optimizes the settling zone parameters and feeding mode, enhances the centrifuge sand removing effect, performance can be comparable to the same specifications of the imported centrifuge.

KOSUN has developed the explosion-proof variable frequency conversion control centrifuge, which can continuously adjust separation factor and drum rotational speed, so that to meet the requirements of the development of the modern drilling engineering. This new technology adapts to the situation of the constant changing of mud...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments